- Model NO.: SMT-711
- Morphology: Solid-State
- Material: Silicone
- Main Agent Composition: Natural Polymer
- Promoter Composition: Curing Agent
- Color: Black
- Transport Package: Cartons
- Origin: Chuzhou, Anhui Province, China
- Bonding Function: Structural Adhesive
- Application: Automobile, Construction
- Classification: Room Curing
- Characteristic: Weatherability
- Composition: Organic Material
- Trademark: SMT
- Specification: 20pcs/24pcs
- HS Code: 3506990000
SMT-711 is neutral silicone sealant with good elasticity and displacement deformation capacity, good at adhering all kinds of powder coating metal. It is especially suitable for doors and windows sealing application and widely used in bonding and sealing applications, because it's good compatibility for most of the substrate surface and thixotropy in the constructing joint which avoid any sagging.
Product typical application:
1,The doors and windows sealing and filling application;
2,Sealing and filling application of metal , aluminum alloy doors and windows or the wall of the room;
3,Glass, ceramic tile, brick and concrete etc;
4,small appliances; oil tight wood.
Safety instruction in the operation:
1.Not recommended for structural adhesive.
2.Be sure there is adequate ventilation.
3.Don't let the non cured sealant contact the eye, if you do it, rinsing eyes with water instantly.
4.The use of cleaning agents should be in line with the relevant safety standards
Carefully read the product information, instructions and tips on container before operation.
Construction application method:
A one component sealant contact with water vapor in the air can be cured. Operation is simple, is not required stiring before using. Manual or gas dynamic glue gun can be operated.
Carefully clean the dust on the surface of the joint, grease and moisture and other contaminants, Make the surface clean and dry with organic solvent.
Cover the adjacent surfaces with adhesive tape for consolidation and cleaning.
Cut the plastic mouth on the required width. Use glue gun carefully for Making sure that the adhesive is in close contact with the base material. Tear off the tape before surface drying.
Avoid sealing the three surface bonding.\
|( Performance at 25 degrees C, 50% humidity)|
|color||Black, grey or special color|
|Depth curing rate||1-2mm/day|
|Surface dry time for working;(min)||≤10|
|Completely cure time;(h)||20|
|Performance at 25 degrees C, 50% humidity after curing 7 days|
|Ultimate tensile strength; MPa||1.0|
|Temperature stability; º C||-50~+170|
|Displacement capacity;%||± 20|
Storage and transportation:
Stored in a dry environment under 25 ºC; shelf life of 12 months; This product is a non dangerous goods.
590ML/PIECE in flexible packaging; 20piece/box